- Home›
- Products›
- Motherboards›
- Server›
- S5500BC›
- Specifications
Intel® Server Board S5500BCSpecifications
Product specifications
| Form factor | SSI CEB-leveraged (12” x 10.5”) |
|---|---|
| Processor support | Up to 2 Intel® Xeon® processors 5500 or 5600 series1 |
| Chipset | Intel® 5500 chipset with Intel® I/O Controller Hub ICH10R |
| Thermal solutions | |
| Intel® QuickPath Technology | 4.8 GT/s, 5.8 GT/s, and 6.4 GT/s |
| Memory |
8 DDR3 DIMM sockets (registered or un-buffered)
|
| Memory RAS features | Channel mirroring, demand scrubbing, patrol scrubbing, and channel independent mode |
| Expansion slots | Pedestal:
2 half-length PCI Express* 2.0 x8 slot 1 half-length PCI Express 2.0 x4 slot (x8 mechanical) 1 half-length PCI Express 1.0 x4 slot 1 half-length PCI 32/33 5V slot 1U rack: 1 low profile half-length PCI Express 2.0 x8 riser in slot 6 |
| Storage | 6 SATA ports (3 Gbps) via ICH10R with Intel® Embedded Server RAID Technology |
| Intel® RAID support | Integrated SATA RAID levels 0/1/10
Optional SW RAID 5 with activation key Optional validated Intel® RAID Controllers |
| Integrated LAN | Embedded dual Intel® Gigabit Ethernet Controllers |
| Integrated graphics | Server Engine* LLC Pilot II* Controller with 64 MB DDR2 memory, 8 MB allocated to graphics |
| Management hardware | Integrated IPMI 2.0 baseboard management controller
Optional Intel® Remote Management Module 3 (Intel® RMM3) |
| Management software |
1 When installing two processors, both must be from the same processor series; either two Intel® Xeon® processors 5500 series or two Intel Xeon processors 5600 series. Out of the box support for the Intel Xeon processor 5600 series will be indicated by the addition of the letter “R” at the end of the product order code. For boards and systems currently supporting the Intel Xeon processor 5500 series, a BIOS update is required before installing the 5600 series processors. Select the support tab above for more information.