Article ID: 000092029 Content Type: Error Messages Last Reviewed: 04/04/2023

Why does Nios® V processor design example script returns error "riscv-none-embed-objcopy: command not found"?

Environment

    Intel® Quartus® Prime Pro Edition
BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

Due to a problem in the Intel® Quartus® Prime Pro Edition Software version 22.2 and RiscFree* IDE for Intel® FPGAs, this error might be seen when running the Nios® V processor design example script.

This is because the script is not using the RISC-V GNU Compiler Toolchain provided in the RiscFree* IDE for Intel® FPGAs.

Resolution

To work around this error in the Intel® Quartus® Prime Pro Edition Software version 22.2 and RiscFree* IDE for Intel® FPGAs, do the following:

  • Change the command "riscv-none-embed-objcopy" to "riscv32-unknown-elf-objcopy"

This problem is currently being fixed in the Intel® Quartus® Prime Pro Edition Software version 22.3.

Related Products

This article applies to 4 products

Intel Agilex® 7 FPGAs and SoC FPGAs
Intel® Arria® 10 FPGAs and SoC FPGAs
Intel® Cyclone® 10 GX FPGA
Intel® Stratix® 10 FPGAs and SoC FPGAs

1