Article ID: 000088655 Content Type: Errata Last Reviewed: 12/16/2021

Error: Could not generate simulation scripts

Environment

  • Intel® Quartus® Prime Pro Edition
  • OS Independent family

    BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Intel® Quartus® Prime Pro Edition Software version 21.3, the error message above may be seen while executing quartus_ipgenerate on a project with more than one R-tile Avalon® Streaming Intel® FPGA IP for PCI Express* instances.

    Multiple error messages as the one below may also be seen as a result of the problem.

    Error: Could not generate simulation scripts
    Error: ram_txapp2x256: rpcie_ram_txapp2x256 does not support generation for Verilog Simulation. Generation is available for: Quartus Synthesis.
    Error: qsys-generate failed with exit code 1: 1 Error, 0 Warnings
    Error: SPD file was not generated: /nfs/disks/quartus_project/ip/rpcie/rpcie_ram_txapp2x256/rpcie_ram_txapp2x256.spd

    Resolution

    To work around this problem, execute IP Generation from the Intel® Quartus® Prime graphic interface or generate the R-tile Avalon® Streaming Intel® FPGA IP for PCI Express* files individually using qsys-generate.

    This problem is fixed starting with the Intel® Quartus® Prime Pro Edition Software v21.4.

    Related Products

    This article applies to 1 products

    Intel® Agilex™ 7 FPGAs and SoC FPGAs I-Series

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.