Article ID: 000087177 Content Type: Install & Setup Last Reviewed: 12/29/2022

Error (170208): Cannot place < X > nodes into a single ALM

Environment

  • Intel® Quartus® Prime Standard Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Intel® Quartus® Prime Standard Edition Software version 16.1 and earlier, you may see this intermittent error during the fitter when using imported Quartus Prime Exported Partition File (.qxp) with setting fitter preservation level to routing and placement.

    Resolution

    A patch is available to fix this problem in the Intel® Quartus® Prime Standard Edition Software version 15.1.2. Download and install patch 2.39 from the appropriate link below. Be sure to read the readme for additional information. Before applying this patch, you must download and install patch 2.39 from the related solution below.

    This problem is fixed starting with the Intel® Quartus® Prime Standard Edition Software version 17.0.

     

    Related Products

    This article applies to 1 products

    Intel® Arria® 10 FPGAs and SoC FPGAs

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.