Article ID: 000086828 Content Type: Error Messages Last Reviewed: 09/10/2018

Error(18948): Error message received from device: Detected internal error.

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

You may see this error in Intel® Quartus® Prime Pro Programmer when trying to configure an Intel Stratix® 10 device with a design that contains any of the following features/IP and the reference clocks for these features/IP are not running and at correct rates before and during configuration.

  • Transceivers (including PCIe HIP)
  • External Memory Interfaces (EMIF) 
  • Hard Processor System (HPS)
  • High Bandwidth Memory 2 (HBM2)
  • Secure Device Manager (SDM)
Resolution

Ensure that the reference clock required by these features is present before and during configuration, otherwise configuration may fail.

Related Products

This article applies to 1 products

Intel® Stratix® 10 FPGAs and SoC FPGAs

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.