Critical Issue
Description
This problem affects DDR2, DDR3, and LPDDR2 products.
When you attempt to simulate a DDR2, DDR3, or LPDDR2 design
using NativeLink with ModelSim or ModelSim-Altera, NativeLink fails
and reports a parameter not found error.
Resolution
The workaround for this issue is to open the generated .do script
found in the ...simulation/modelsim directory in a
text editor, and change the following code:
vsim -t 1ps -L altera_ver -L lpm_ver -L sgate_ver -L
altera_mf_ver -L altera_lnsim_ver -L arriav_ver -L arriav_hssi_ver
-L arriav_pcie_hip_ver -L rtl_work -L work -voptargs=" acc" dut_example_sim�
to the following code:
vsim -t 1ps -L rtl_work -L work -L altera_ver -L lpm_ver
-L sgate_ver -L altera_mf_ver -L altera_lnsim_ver -L arriav_ver
-L arriav_hssi_ver -L arriav_pcie_hip_ver -voptargs=" acc" dut_example_sim�
This issue will not be fixed.