Article ID: 000082935 Content Type: Troubleshooting Last Reviewed: 10/17/2011

In the 10GBASE-R PHY MegaWizard Plug-In Manager, compilation fails for Stratix IV GX if you select a Starting channel number other than the default value 0

Environment

  • Quartus® II Subscription Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT

    Critical Issue

    Description

    In the 10GBASE-R PHY MegaWizard Plug-In Manager, if you select a Starting channel number other than the default value 0, compilation fails with an error similar to the following:

    Error: Cannot find Memory initialization File or Hexadecimal (Intel-Format) File <file name> for ROM instance <instance name>

    Resolution

    Since every instantiation of the 10GBASE-R PHY megafunction includes a reconfiguration block, 0 is the correct starting channel number. Do not change the value of Starting channel number.

    Related Products

    This article applies to 1 products

    Stratix® IV FPGAs

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.