Article ID: 000081302 Content Type: Error Messages Last Reviewed: 06/25/2014

ERROR: CB detected a CRC error between words 0 and 25000

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

If a .sof image is first loaded into the FPGA (using sof2flash or JTAG) when compression and CvP Update are enabled, the above error will be seen when the second core image (.core.rbf) is loaded over PCI Express.

This is due to the fact that .sof files are always un-compressed. Hence if the first configuration is uncompressed, the FPGA configuration control block requires that subsequent configuration files are the same.

Resolution If CvP Update mode and compression are required, ensure that the first image loaded into the FPGA uses compression (use a .pof or .jic file when programming the flash device). Ensure that the MSEL pins are correct for your required configuration scheme.

Related Products

This article applies to 13 products

Cyclone® V SX SoC FPGA
Cyclone® V GT FPGA
Stratix® V GX FPGA
Cyclone® V GX FPGA
Stratix® V GT FPGA
Stratix® V GS FPGA
Arria® V GZ FPGA
Arria® V SX SoC FPGA
Cyclone® V ST SoC FPGA
Arria® V ST SoC FPGA
Arria® V GX FPGA
Arria® V GT FPGA
Cyclone® V SE SoC FPGA

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.