SEVERE: An error occurred while running script "::emif_cal_dbg::odt_cal::run_odt_cal_callback

Due to a problem in the Intel® Quartus® Prime Pro Edition Software version 20.2, you may see a similar error to the one shown below when a calibration failure occurs in the Intel Stratix® 10 EMIF Unified Calibration Debug Toolkit or the Intel Agilex® 3 FPGA EMIF Debug Toolkit.

SEVERE: An error occurred while running script"::emif_cal_dbg::odt_cal::run_odt_cal_callback

": ed_synth_inst: key "65542" not known in dictionary  

while executing

"dict get $dictionary $key"  

(procedure "::emif_cal_dbg::util::family_expert::get_dict_elem" line 3)  

invoked from within

"::emif_cal_dbg::util::family_expert::get_dict_elem cal_stage [expr $val]"

This example error message displays an error code “65542” when a calibration failure occurs and is not reported by the EMIF Toolkit.

For the Intel® Stratix® 10 EMIF Unified Calibration Debug Toolkit, below is a list of the calibration stages and associated error codes that are not reported.

Calibration Stage                                             Error Code

WRITE_LEVEL_EDGE                                           65541

WRITE_LEVEL_CLOCK                                         131077 

WRITE_DESKEW_DM_CENTER                          65542

MARGINING_DQ                                                   65547 

MARGINING_DM                                                   131083

For the Intel Agilex® 3 FPGA EMIF Debug Toolkit, below is a list of the calibration stages and associated error codes that are not reported.

Calibration Stage                                              Error Code

WRITE_LEVEL_EDGE:                                          65541 

WRITE_LEVEL_CLOCK:                                        131077

WRITE_DESKEW_DM_CENTER:                          65542

READ_DESKEW_DBI_CENTER:                           65540