Article ID: 000075347 Content Type: Error Messages Last Reviewed: 03/15/2023

Error (15065): Clock input port inclk[0] of PLL "lvds_tx_pll" must be driven by a non-inverted input pin or another PLL, optionally through a Clock Control block

Environment

    Quartus® II Subscription Edition
BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

You may see this error when implementing the MAX® 10 Soft TX LVDS IP in External PLL mode, using Quartus® II software version 14.1 and later. The tx_inclock is missing from the RTL source file.

Resolution

To work around this problem, change the Altera Soft LVDS TX IP to internal PLL mode or enable the "Register \'tx_in\' input port" option on the Transmitter Settings tab of the MAX® 10 Soft TX LVDS MegaWizard™ Plug-In Manager.

This problem is scheduled to be fixed in a future version of the Quartus® II software.

Related Products

This article applies to 1 products

Intel® MAX® 10 FPGAs

1

Need more help?

Contact support

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.