How to create RAID 5 and RAID 6 in Intel® RAID Adapter RS3P4TF160F

Intel® RAID Adapter RS3P4TF160F does not show the RAID 5 and RAID 6 as array option.

​​​​You can change the profile from the UEFI HII Configuration Utility using the steps below:

1. After the Intel® RAID Controller/Adapter and the drives are installed, restart the server and press F2 to open the UEFI menu. Follow these steps:
   1. Advanced
   2. PCI configuration
   3. UEFI option ROM control
2. Choose the Intel® RAID Controller by navigating the menu in the following order:
   1. Main Menu
   2. Controller Management
   3. Advanced Controller Management
   4. Manage Controller Profiles
3. Set the option named Personality Mode to RAID.
4. Press F10 and reboot the system for the changes to take effect.

Then, follow the suggestion in the link related to properly set the RAID Controller/Adapter Profile