Skip To Main Content
Support Knowledge Base

Does the Intel® Server Board M50CYP2SB1U Have Embedded Network Interface Controller (NIC)?

Content Type: Product Comparison   |   Article ID: 000091992   |   Last Reviewed: 09/11/2025

Environment

Operating System

OS Independent family

Description

Unable to locate if a NIC is present on the Intel® Server Board M50CYP2SB1U.

Resolution

Refer to the Technical Product Specification for the Intel® Server System M50CYP1UR Family

In the section Server Board Features, the figure Intel® Server Board M50CYP2SBSTD Component / Feature Identification shows:
No NIC is present on the board.
Serial Port A and Remote Management Port are present.
Additionally, OCPv3 Adapter Connector is shown.

example image

Additional information

For information on how to remove/install this type of device, see the Integration and Service Guide for the Intel® Server System M50CYP1UR Family .

Refer to the section Ethernet Network Adapter for OCP® – Installation / Removal.

Related Information

Technical Product Specification for the Intel® Server System M50CYP1UR Family
 

Section named Intel® Ethernet Network Adapter for OCP* Support shows the figure named Supported Intel® Ethernet Network Adapters for OCP*.

DescriptionInterfaceiPC
Dual port, RJ45, 10/1 GbEPCIe* 3.0X710T2LOCPV3
Quad port, SFP+ DA, 4x 10 GbEPCIe* 3.0X710DA40CPV3
Dual Port, QSFP28 100/50/25/10 GbEPCle* 4.0E810CQDA20CPV3
Dual Port, SFP28 25/10 GbEPCle* 4.0E810XXVDA20CPV3

These products are shown below:

Intel® Ethernet Network Adapter X710-T2L for OCP 3.0 product code X710T2LOCPV3
Intel® Ethernet Network Adapter X710-DA4 for OCP 3.0 product code X710DA4OCPV3
Intel® Ethernet Network Adapter E810-CQDA2 for OCP 3.0 product code E810CQDA2OCPV3
Intel® Ethernet Network Adapter E810-XXVDA2 for OCP 3.0 product code E810XXVDA2OCPV3

These types of devices are connected to the board via a mezzanine connector.

Related Products

This article applies to 2 products.