Intel® Laminar RS1 Cooler Specifications
Content Type: Product Information & Documentation | Article ID: 000089192 | Last Reviewed: 01/03/2025
Support Knowledge Base
| Note | This Intel® Laminar RS1 Cooler has been discontinued as of December 27, 2024. |
As a result of product discontinuance, the Intel® Laminar Cooler RS1 will be replaced with Intel® Laminar Cooler RM1 when shipped in box with Pentium G7400 and Celeron G6900 processors. Customers may find both options available in the market. These are not sold separately to end-users.
| Highlights of this cooler
Intel® Laminar RS1 Cooler Heatsink Specifications
|
|
Intel® Laminar RS1 Cooler Thermal Solution Specifications
| Overall Height | Up to 47mm (top of fan to bottom of heatsink) |
| Overall Size | Up to 100mm x 100mm |
| Mass | Up to 260g |
| Sound Power Level | 4.6 BA (max RPM, 40C inlet, 65W) |
| Sound Pressure Level | 36 dBA (max RPM, 40C inlet, 65W) |
| TDP Support | Up to 65W (Intel® Pentium®/Celeron® Desktop Processors) |
| Fan Type | PWM controlled variable speed fan |
| Connector Type | 4-pin |
| Operating Voltage | 13.2V max, 12.0V rated, 10.8V min |
| Current (peak) | Up to 400mA |
| Max RPM (+/- 5%) | Up to 3150 RPM |
| Min RPM (+/- 20%) | 600 RPM |
| Operating Temp | 0 to 70C |
| Operating Humidity | 85% relative humidity @ 55C |
| Fan Protection | Locked-rotor/polarity protected |
| Sense Frequency | 2 pulses/Rev, 12V pull-up with 10Kohm |
| PWM Frequency | 25KHz +/- 5KHz |
| PWM Pull-up Voltage | 5.25V max |
| PWM Duty Cycle Range | 0–100% |