Skip To Main Content
Support Knowledge Base

Intel® Wi-Fi Adapter Not Showing in Device Manager

Content Type: Troubleshooting   |   Article ID: 000059850   |   Last Reviewed: 11/12/2026

Environment

Operating System

Windows 11* Family, Windows® 10 family

Description

My wireless card is completely missing from Device Manager and I can't figure out why it's not showing up at all.

Resolution

  1. Perform a cold reboot. Fully shut down your device, remove all sources of power (including the battery if applicable), then power the device back on. Check if the Wi-Fi adapter appears in Device Manager.
  2. Enable the wireless adapter in your BIOS settings. Contact your system Original Equipment Manufacturer (OEM) for guidance on accessing your BIOS.
  3. Update your system BIOS to the latest version. Contact your OEM for guidance if needed.
  4. Reset your BIOS settings to defaults. Contact your OEM for guidance if needed.
  5. Identify which Wi-Fi adapter your system is using, then download and install the latest drivers. Consider performing a clean installation to remove any previous driver files that may be causing conflicts. Visit the Intel Download Center to find the correct driver for your adapter.
  6. Run Windows Update to ensure your operating system and system drivers are fully up to date.
  7. Reset your network settings and Winsock data.
  8. Reset your PC. If the issue persists after completing all troubleshooting steps, back up your personal files and reset your PC to its original configuration. Refer to Recovery options in Windows for guidance.
  9. If the issue remains unresolved, contact your system OEM to check the hardware and receive further assistance.

Related Products

This article applies to 69 products.

Discontinued Products