Summary
System BIOS configured as UEFI due to Intel® RAID Adapter RSP3WD080E (Tri-Mode) work in UEFI only
Description
No matter which Intel® RAID Adapter RSP3WD080E driver has be installed, there is always a yellow bang in the Windows* Device Manager with the message Device cannot start: code 10
Resolution
To properly configure the Intel® RAID Adapter RSP3WD080E (Tri-Mode) follow the next steps:
- Configure the system BIOS in UEFI as described in the article: How to Change the Boot Mode (UEFI/Legacy) on Intel® Server Boards
- Create the RAID array needed, go to Advanced > PCI configuration > UEFI option ROM control > locate the RAID controller model
- Proceed with the RAID volume creation (if the system was configured in Legacy, delete any previous RAID array created)
- Launch Windows* Setup and proceed with the operating system installation
- Load the proper RAID controller driver