Support Knowledge Base

Link Flapping Issue Encountered on Intel® Ethernet Converged Network Adapter X710-DA2 with the "linkFlapErrDisabled" Error

Content Type: Error Messages | Article ID: 000058853 | Last Reviewed: 07/16/2021

Description Resolution

Description

Intel® Ethernet Converged Network Adapter X710-DA2 connected on a Cisco Nexus* 5672UP Switch is reporting linkFlapErrDisabled.

Ensure to use Compatible SFP+ Modules, SFP Modules, and Cables for Intel® Ethernet Server Adapter X710 Series.
Power off the server where the X710 was installed.
On the Cisco switch, perform a shutdown and no shutdown command of the ports.
Power on the server and verify if the issue was completely resolved.

This article applies to 2 products.

Intel® Ethernet Controller X710-AM2 Intel® Ethernet Controller X710-BM2

Contact support