Skip To Main Content
Support Knowledge Base

How to Replace the Power Distribution Board (PDB) on Intel® Server Chassis P4304XXMUXX

Content Type: Maintenance & Performance   |   Article ID: 000058703   |   Last Reviewed: 04/19/2023
Description Resolution Additional information

Environment

Operating System

OS Independent family
Intel® Server Chassis P4000G Family Intel® Server Chassis P4000S Family

Description

Steps and information on how to replace the PDB on Intel® Server Chassis P4304XXMUXX

Resolution

Follow the steps below to replace the PDB on an Intel® Server Chassis P4304XXMUXX:

NoteThe location of the PDB is different depending on the model of the Power Supply Unit (PSU) in use.
  1. Release the two screws that secure the PDB to the chassis.
  2. Remove the old PDB.
  3. Install the new PDB in the correct location for your Power Supply Unit (PSU) model.
  4. Secure the PDB to the chassis with the two screws.

Additional information

For further information, refer to the corresponding Service Guide based on your server board.

Need more help?

Contact support
Contact support