Support Knowledge Base

How to Ensure That SATA Drives Are Detected by the BIOS on Intel® Server Board S2600STBR

Content Type: Install & Setup | Article ID: 000057969 | Last Reviewed: 10/13/2026

Description Resolution

Environment

Operating System

OS Independent family

3.5 inch Hot-swap Drive Bay Kit AUP4X35S3HSDK

Description

SATA drives installed in the 3.5-inch Hot-swap Drive Bay Kit (AUP4X35S3HSDK) are not detected by the BIOS on the Intel® Server Board S2600STBR.

Resolution

To enable BIOS detection of SATA drives installed in the 3.5-inch Hot-swap Drive Bay Kit (AUP4X35S3HSDK), connect the drive bay to the Intel® Server Board S2600STBR using the following required cables:

Mini-SAS HD cable kit AXXCBL380HDHD
I2C (Inter-Integrated Circuit) cables

Related Information

For more information, refer to section 3.4 4 x 3.5" Hot-Swap SAS/SATA Data Cable Guide of the Intel® Server S2600ST Product Family Configuration Guide.

Need more help?

Contact support