Article ID: 000057575 Content Type: Install & Setup Last Reviewed: 12/27/2021

How to Set the RAID Configuration for the Intel® Server Board M10JNP2SB

Environment

Intel® Server Board M10JNP2SB

Windows Server 2016 Family*

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Summary

RAID mode configuration needed

Description

Unable to set the RAID via the Intel® Rapid Storage Technology Enterprise (Intel® RSTe).

Resolution
  1. Navigate to Advanced > CSM Configuration > Compatibility Support Mode (CSM) Configuration > CSM Support (Enabled) and Set to UEFI the Network, Storage, Video, Other PCI devices, save changes (F4>Y)
  2. Chipset > South Bridge > SATA And RSTe Configuration > SATA Mode Selection (RAID)
  3. Launch Windows setup and load the driver named: "VROC-f6_iaStorE_win8_64" from the link Intel® Rapid Storage Technology Enterprise (Intel® RSTe) Software RAID Driver for the Intel® Server Board M10JNP2SB, Version: 6.2.0.1239 (Latest) Date: 7/2/2020, the path is:

SW_Packages > f6-drivers > VROC_XXXX_F6-drivers > VROC_XXXX_F6-drivers

Related Products

This article applies to 1 products

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.