Summary
How to get the Intel® Server Board M10JNP2SB to output video through the HDMI and the DisplayPort ports
Description
- Unable to use the Intel® UHD Graphics
- Unable to get a video output through the HDMI and the DisplayPort ports
Resolution
- Turn the system on, and then go into the BIOS by pressing F2.
- On the BIOS, select the Chipset tab, and then select North Bridge.
- Select Graphics Configuration:
- Select Primary Display:
- Select Primary Display, Change to IGFX:
- Press F4 to save the changes and exit the BIOS.
- Then Boot to the operating system.
- Use this driver if using Windows (Intel® UHD Graphics Driver for Server Systems Based on the Intel® Xeon® E-2200 Processor). Compatible versions attached:
- Windows® 10, 32-bit
- Windows 10, 64-bit
- Windows Server* 2019
- Windows Server 2016