Steps to reset both BIOS user and administrator passwords
You can clear both BIOS User and Administrator passwords using the Password Clear jumper on your Intel® Server Board, refer to specific Technical Product Specifications.
BIOS passwords may need clearing when passwords are forgotten, inherited systems have unknown passwords, or after security policy changes.
The Password Clear Jumper Block causes both the User password and the Administrator password to be cleared if they were set. The operator should be aware that this creates a security gap until passwords have been installed again through the <F2> BIOS Setup utility. This is the only method by which the Administrator and User passwords can be cleared unconditionally. Other than this jumper, passwords can only be set or cleared by changing them explicitly in BIOS Setup or by similar means. No method of resetting BIOS configuration settings to default values will affect either the Administrator or User passwords.
| Note |
Refer to this link for OEMs that use Intel® Products Where to Find List of System Manufacturers That Use Intel® Products. |