How to Get the Embedded Network Ports to Work in Legacy Mode?
Content Type: Troubleshooting | Article ID: 000039447 | Last Reviewed: 07/13/2022
When the boot mode is changed to legacy mode the system cannot see the onboard 10GbE network ports, but it does see an add-in 40GbE port. If the system is in UEFI mode, the 10GbE ports work fine.
Run the firmware update for the network connection in the Intel® Server Board S2600WFT.
| Note | The firmware can be downloaded from the Non-Volatile Memory* (NVM) Update Utility for Intel® Ethernet Converged Network Adapter X722 Series for Intel® Server Board S2600WF (WFT sku) Family. |