Support Knowledge Base

Teaming Features not Working Properly Using an Intel® Ethernet Adapter with Another Manufacturer's Ethernet Adapter

Content Type: Compatibility | Article ID: 000037484 | Last Reviewed: 08/11/2025

Description Resolution

Windows® 10, 64-bit*

Description

Teaming is not functioning correctly when using an Intel® Ethernet Adapter and an adapter of another manufacturer.

In most cases teaming an Intel® Ethernet Adapter with another manufacturer's adapter will be a workable scenario.

Recommendations when teaming two Ethernet adapters from different manufacturers:

Make sure drivers are up to date on both adapters.
In some cases, the adapters require the same make, model, and firmware.
Contact the manufacturer of the adapter and see if they support teaming with other manufacturers.
Verify the team policy that is being used. A simple (Port ID–based) policy may help to avoid any compatibility issues. Try different teaming policies to find one that works.

This article applies to 8 products.

Intel® Ethernet Controller X710-BM2 Intel® 82579LM Gigabit Ethernet PHY Intel® Ethernet Connection I219 Series Intel® 82579 Gigabit Ethernet Controller Intel® Ethernet Controller X710-AM2 Intel® Ethernet Controller I225 Series Intel® 82579V Gigabit Ethernet PHY Intel® Ethernet Controller I226 Series

Contact support