How Can I Configure or Reset the Intel® Optane™ Memory M Series in MSI* System to Non-Optane?

System is ready for Intel Optane™ but no module is detected.

To set up Intel® Optane™ Memory in BIOS:

1. Shut down and boot into your BIOS.
2. Press F7 to go to the advanced mode.
3. Go to Settings>Boot>Boot Configuration and check the following option: Boot Mode Select = UEFI.
4. Go to Settings>Advanced>Windows OS Configuration and make sure that the option that says Windows* 8.1/10 WHQL Support is enabled.
5. Go to Settings>SATA Configuration and check the following options:
   • SATA Mode: RAID/Optane™ Mode
   • M.2 Genie: Enabled -M.2_1
   • RST PCIe Storage Remapping: Enabled.
6. Reinstall the operating system.
7. Reinstall the Intel® Optane™ drivers.

To reset to non-Optane:

1. Open the BIOS.
2. Go to Settings>Advanced>Intel Rapid Storage Technology.
3. Select Intel PCIe (Optane module with serial number).
4. Select Reset to non-Optane.
5. Save changes and boot to Windows* again.
6. Open the Intel® Optane™ Memory application in order to enable again the Intel® Optane™ Memory module.