Skip To Main Content
Support Knowledge Base

How to keep the CPU temperature within its thermal limits?

Content Type: Maintenance & Performance   |   Article ID: 000032528   |   Last Reviewed: 07/08/2021

Environment

Intel® Server Board S2600STB

Description

The CPUs remain below 75 degrees centigrade with the PWM set to 50 percent. Runs at 2500RPM during idle, ramping to 8000RPM during stress times.

Resolution

In order to make sure that the system will continue to be within thermal limits, change fan profile from Acoustic over to Performance (BIOS > Main screen, select Advanced > System Acoustic and Performance Configuration).
So there will be cooling adjusted as preferred method in oppose to components throttling, and configure Baseboard Management Controller (BMC) alerts sending for all thermal sensors (Refer to the BMC guide page 49, 7.3.1 Alerts section)

The above statement applies for validated configurations. For chassis compatibility refer to the following article: Chassis Compatibility List for Intel® Server Board S2600ST Family

Related Products

This article applies to 7 products.