Click or the topic for details:
What is Intel® VROC?Intel® Virtual RAID on CPU (Intel® VROC) is an enterprise RAID solution specifically designed for NVMe-based solid state drives (SSDs).
What is the biggest advantage of Intel VROC?The biggest advantage of Intel VROC is the ability to directly connect NVMe-based SSDs to the new Intel® Xeon® Scalable processor PCIe* lanes, then make RAID arrays using those SSDs without using a RAID host bus adapter (HBA). As a result, Intel VROC unleashes NVMe SSD performance potential without the complexity and power of a traditional hardware RAID HBA. In this way, Intel VROC was designed specifically for NVMe SSDs, and is positioned to appropriately support this technology and help transition the market to these faster drives.
Since Intel VROC can RAID SSDs directly connected to the CPU, does that mean hardware RAID HBA is no longer needed?Hardware RAID HBAs have been serving the RAID industry for dozens of years in support of legacy SATA and SAS HDDs and SSDs, and are evolving to add NVMe functionality. Intel VROC does not need a hardware RAID HBA for NVMe-based SSDs, but this does not mean this industry does not need it. Intel VROC provides a compelling alternative way to RAID NVMe SSDs. Our goal is to migrate SSDs from the legacy SATA/SAS interfaces that were designed for much slower HDDs to the modern NVMe protocol.
How is Intel VROC performance and CPU utilization compared to a hardware RAID HBA solution?Intel VROC is a data center quality product with performance and CPU Utilization metrics befitting such applications. New NVMe enabled hardware RAID HBAs are new to the market as well. Performance does vary depending on configuration and testing parameters, but generally, data transfer rates are comparable between the two technologies. HBAs do have on-card silicon to perform RAID calculations, so typically they use fewer CPU cores. However, from a system perspective, Intel Xeon Scalable processors are efficient CPUs and RAID calculations with VROC typically use a small fraction of the total cores available. Additionally, it is important to look at the work those cores are doing while being utilized, such as IOPS/CPU utilization.
Which platform will support Intel VROC?Intel VROC is primarily targeted to professional workstations and server platforms. It requires the Intel® Volume Management Device (Intel® VMD), a hardware feature only available on the new Intel® Xeon® Scalable processors. Because the types of RAID support are very specific to the OEM platform configuration, it is up to OEM/ODM to decide whether to offer Intel VROC. Please consult your server or workstation provider for specific information. There is also limited support on X299 systems on highend desktops. See Q6. For a full list of support details of Intel VROC, (CPU support, OS support, SSD support, etc.), please reference the Intel® VROC Supported Configuration Guide.
We saw Intel VROC on an Intel® Core™ processor and X299 chipset-based high-end desktop motherboard shown at Computex 2017. Will Intel VROC be supported by this platform?Intel VROC is primarily targeted to professional workstations and server platforms at launch, but can be enabled on any platform with the Intel Volume Management Device (Intel VMD) feature. Starting Sept. 25, 2017, Intel VROC will be supported on X299 high-end desktop platforms (HEDT) as well. Please check HEDT marketing team for specific Intel VROC support on X299 platforms.
Is Intel VROC software or hardware RAID?Intel VROC is a hybrid RAID solution. It has attributes like hardware RAID because of the key silicon feature called Intel Volume Management Device (Intel VMD) which is offered with the new Intel Xeon Scalable processors. Intel Virtual RAID on CPU (VROC) utilizes Intel VMD to aggregate NVMe SSDs allowing bootable RAID. Intel VROC also has attributes like software RAID. For instance: it uses some of the CPU cores to calculate the RAID logic. Because of this combination of software and silicon, Intel VROC is called a hybrid RAID solution.
Does Intel VROC support third-party SSDs?Intel VROC supports both Intel® SSDs and selected third-party SSDs. Please see Intel® VROC supported configuration page for supported third-party SSDs.
What is the Intel VROC hardware key?Intel VROC is a licensed product for sale through the OEMs or ODMs with a support service level agreement. The Intel VROC hardware key is the mechanism to obtain a license to the Intel VROC software. Certain OEMs/ODM have built servers and workstations that support Intel VROC by adding a key header to their motherboards. The Intel VROC hardware key is required to be inserted into that motherboard to enable the RAID license. Only one key is needed per system (that is, per server or per workstation).
If no RAID functionality is needed, Intel VROC Pass Through can be used. This functionality does not need a license/HW Key, and provide Intel® VMD features and functionality without RAID.
Where can I get an Intel VROC hardware key?End users can expect the hardware keys to be installed by their OEMs in their servers, as long as end users request a server with a complete Intel VROC solution. OEMs obtain the keys from Intel or Intel’s distributors. If an end user decides to upgrade to Intel VROC after purchasing a platform, they can purchase an Intel VROC key from their specific server OEM website. In this way, end users can get proper support for Intel VROC from the platform supplier.
What are the different Intel VROC SKUs?Intel VROC has three different SKUs:
- Intel VROC Pass Through: No RAID support, just stand alone NVMe-based SSDs connected to Intel VMD enabled PCIe lanes. No hardware key needed.
License included in Platform Control Hub (PCH).
- Intel VROC Standard: RAID 0/1/10 support. Standard hardware key needed.
- Intel VROC Premium: RAID 0/1/5/10 support. Premium hardware key needed.
- Intel VROC Intel SSD Only: RAID 0/1/5/10 support. Intel SSD Only hardware key needed. No third-party SSD support. Only functional with Intel brand SSDs.
How are Intel VROC and Intel® Rapid Storage Technology Enterprise (Intel® RSTe) related? Is Intel RSTe still a product?Intel VROC and Intel Rapid Storage Technology Enterprise (Intel RSTe) were previously related products in the same product family. The SATA RAID portion of the product family was called Intel RSTe and the NVMe RAID portion was called Intel VROC. However, starting in Q1 2019, with the launch of Intel VROC 6.0, the Intel RSTe name was removed, and all RAID solutions in this product family were branded as Intel VROC. The SATA functionality remains, but is now branded as Intel VROC (SATA RAID). Intel RSTe is no longer a referenced product by Intel. The name may still appear in some legacy products, but all new references will solely use the Intel VROC nomenclature.
For NVMe RAID, Intel VROC (VMD NVMe RAID) is architected to use Intel VMD to provide the following new features to NVMe SSDs:
- Bootable RAID
- Surprise hot-plug
- LED management
- RAID 5 Double Fault Protection
- Support for third-party SSDs
What is RAID 5 Double Fault Protection?Intel VROC can protect RAID 5 data even when both unexpected power loss and RAID volume degradation occur at the same time. This double fault condition is, at times, referred to as the RAID 5 write hole (R5WH). Many RAID solutions have dealt with this challenge by acquiring a backup power unit. Intel VROC addresses this problem by using patent-pending journaling.
What is LED management?The LED management feature supports SSD indicator lights by using the Status LED on the server enclosure that blinks different patterns to indicate the different status of each SSD in the RAID array. LED management provides easier maintenance and helps avoid accidental human errors. Intel VROC follows the blinking patterns defined by the International Blinking Pattern Interpretation standard.
I am an end user. How can I try or buy VROC?Intel VROC is a high platform integrated feature. There is deep enabling work required on platform BIOS, hardware as well as drivers. Please ask your server provider for an Intel VROC-capable server to try or buy. Intel PCSD (Platform Collaboration and Systems Division) also provides servers with Intel VROC capability.
Which OEM or ODM has designed in Intel VROC?Several OEMs and ODMs have designed Intel VROC into appropriate server and workstation platforms. We can provide guidance after the OEMs and ODMs launch their products, but at this moment, ask your server or workstation provider directly.
I found RAID 0 works without Intel VROC hardware key. But the product brief says I need VROC hardware key for RAID 0. What should I do?An Intel VROC hardware (HW) key is required to use RAID 0/1/5/10 for most SSDs. However, Intel VROC is also designed to provide RAID 0 for Intel PCIe Gen3 x8 SSDs without requiring a HW key. For instance: Intel® SSD DC P4608. For any other regular x4 SSDs, without HW key, RAID 0 might work, or might not work. In short, an Intel VROC HW key is required for official support for RAID 0 with regular PCIe Gen3 x4 SSDs. Operating RAID 0 in this situation is done at the risk of the user.
What is the difference between Intel VROC and Microsoft Spaces*?Intel VROC supports the following features that Microsoft Spaces does not:
- Bootable RAID
- Linux* Support
- RAID Management in pre-OS environment
- Support LED Status indicator on SSDs in RAID arrays
What is the difference between Intel VROC and Linux MD RAID?Intel VROC for Linux is built upon MD RAID, and Intel VROC team has an MD RAID maintainer on the team. However, Intel VROC has the following extra features:
- Provides UEFI HII and UEFI Shell command line RAID management
- Provides webpage based, remote RAID management and RESTful APIs
- Fully validated and supported with Purley platform and industry-select SSDs
- Provides hotfix/patch to specific customer issue on supported OS
- Provides a bootable NVMe RAID solution
If Intel VROC is built upon MDRAID, how and when was it implemented to Linux distributions?The Intel VROC development team adds features and functionality to Intel VROC and then upstreams those changes to the Linux kernel. A specific Linux distribution’s kernel version, release schedule, and decision to include any Intel VROC changes will impact the availability of Intel VROC in that distribution.
As general guidance, a certain level of Intel VMD and Intel VROC code needs to be in the Linux kernel used in order for Intel VROC to be functional. The initial code changes for this functionality were around kernels 4.8/4.10 and limited functionality can be expected. However, for a stable and fully functional base, it is recommended to use kernel 4.15 or above.
How is Intel VROC performance different for Linux compared to Microsoft Windows*?Intel VROC for Windows and Linux are implemented in two separate architectures and implementations so they present different performance. For instance, we are able to achieve 2.5M1 read IOPS in 4 disk RAID 0 in Linux, but only 1.0M2 IOPS in Windows. We are continuously working on performance improvement.
If I have an issue with my Intel VROC application, how should I get support?Intel VROC is a platform-connected application that relies on platform-level integration to work. Therefore, platform manufacturers do a lot of work to get VROC operational on their platforms, and each platform implementation may be slightly different with different dependencies. For example, platform manufacturers can choose to omit certain Intel VROC features that would impact their Intel VROC installation. Or, platform manufacturers could integrate Intel VROC features into their own storage software solutions which would cause dependencies unknown to Intel.
To better support Intel VROC issues, users should first contact their platform manufacturer to confirm where in the platform an issue is occurring. The platform manufacturer will then work with Intel to resolve issues as appropriate. For Intel VROC high level questions, please review the Intel® VROC Support Page. If questions are not answered there, users can contact Intel Customer Support.
Both Intel RST and Intel VROC are currently supported on X299 HEDT platforms. How are they related? What should I use one over the other?Intel RST is made for client-based workloads, while Intel VROC is made for enterprise-based workloads. Please reference the below documentation for the primary differences between them:
It is important to note that Intel® RST and Intel® VROC should not be used on the same platform at the same time. They are separate products that provide similar functionality and are not compatible together.
1System configuration: Intel® Server Board S2600WFT family, Intel® Xeon® 8170 Series Processors, 26cores@ 2.1GHz, RAM 192GB , BIOS Release 7/09/2018, BIOS Version: SE5C620.86B.00.01.0014.070920180847 OS: RedHat Linux 7.4, kernel- 3.10.0- 693.33.1.el7.x86_64, mdadm - v4.0 - 2018-01-26 Intel build: RSTe_5.4_WW4.5, Intel ® VROC Pre-OS version 22.214.171.1249, 4x Intel® SSD DC P4510 Series 2TB drive firmware: VDV10131, Retimer BIOS setting: Hyper-threading enabled, Package C-State set to C6(non-retention state) and Processor C6 set to enabled, P-States set to default and SpeedStep and Turbo are enabled Workload Generator: FIO 3.3, RANDOM: Workers-24, IOdepth- 256, No Filesystem, CPU Affinitized Pass Through Baseline: 1x Intel® SSD DC P4510 Series, 2 TB, Firmware: VDV10120, SSDPE2KX020T8
Performance results are based on testing as of October 5, 2018 and may not reflect all publicly available security updates. See configuration disclosure for details. No product can be absolutely secure.
2System configuration: Intel® Server Board S2600WFT family, Intel® Xeon® 8160T Series Processors, 24cores@ 2.1GHz, RAM 192GB , BIOS Release 07/09/2018, BIOS Version: SE5C620.86B.00.01.0014.070920180847 OS: Windows Server 2016, Version 10.0.14393 Build 14393, Intel RSTe UI version: 126.96.36.1994, Intel® VROC Pre-OS version 188.8.131.529, 4x Intel® SSD DC P4510 Series 2TB drive firmware: VDV10131, Retimer BIOS setting: Hyper-threading enabled, Package C-State set to C6(non-retention state) and Processor C6 set to enabled, P-States set to default and SpeedStep and Turbo are enabled Workload Generator: IOmeter version: 1.1.0 Dyn buckets 1.2, RANDOM: Workers-16, IOdepth- 32, No Filesystem, CPU Affinitized Pass Through Baseline: 1x Intel® SSD DC P4510 Series, 2TB, Firmware: VDV10131, SSDPE2KX020T8)) Performance results are based on testing as of August 26, 2018 and may not reflect all publicly available security updates. See configuration disclosure for details. No product can be absolutely secure.
No product or component can be absolutely secure.
No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document. Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.
Your Costs and results may vary.
©Intel Corporation. Intel, the Intel logo, and other Intel marks are trademarks of Intel Corporation or its subsidiaries. Other names and brands may be claimed as the property of others.