Skip To Main Content
Support Knowledge Base

System May Hang with SAS HDDs Installed and System Populated with SATA RAID Key

Content Type: Troubleshooting   |   Article ID: 000008544   |   Last Reviewed: 12/04/2023

If a system running in Intel® Embedded Server RAID Technology 2 (ESRT2) mode using only SAS hard disk drives and a SATA C600 RAID key is installed, the system may hang at POST.

The system will stay hung at POST when POST is loading the SCU ESRT2 OpROM. POST code may exhibit a halt 0xB2 error.

This issue will not be fixed. Remove the SATA C600 RAID key, or use SATA hard disk drives.

Related Products

This article applies to 67 products.

Discontinued Products