Configuring Jumbo Frames on Intel® Modular Server


Install & Setup



Jumbo frame configuration on the Intel® Modular Server may not save correctly in all cases.

To configure jumbo frames on the Intel Modular Server, customers are advised to use the following process:

  1. Go to the Advanced Configuration GUI for the Ethernet Switch.
  2. On the first screen:
    • Select Enable in the “Jumbo Frame After Reset”
    • Select Apply
    • Select Save changes
  3. Go to the reset screen in the advanced configuration menu:
    • Select Save changes
    • Wait for 15 seconds
    • Select Reset

Upon reboot, Jumbo frames should show as enabled.

Related topics
Common configurations and definitions for the Ethernet Switch Module
FAQs about the Intel® Gigabit Ethernet Switch AXXSW1GB
Intel Gigabit Ethernet Switch AXXSW1GB User Guide