Performing a Timing Simulation with the ModelSim Software
Important: Intel recommends that you set Time scale settings to
picoseconds (ps) in the interface or with command-line commands when performing timing
simulation.
You can perform a timing simulation of a Verilog HDL or VHDL design with the Mentor Graphics® ModelSim® PE or SE software with the ModelSim® interface or with command-line commands.
Note: For more information about using
EDA simulators, refer to Mentor Graphics® ModelSim® and QuestaSim Support in the Intel® Quartus® Prime Handbook.
If you want to perform power analysis, perform power analysis with the Power Analyzer.