- If you have not already done so, perform Setting Up
the Incisive Enterprise Simulator Working Environment.
- Start the IES software by typing
nclaunch
at a command prompt:
- On the File menu, click
Set Design
Directory.
- Browse to your design directory.
- Click Create cds.lib File. In the New cds.lib File dialog box, select the
libraries to include and click Save.
- Under Work Library,
click New.
Note:Intel recommends using the IES (Verilog or VHDL) default library names when you create
a library. You should name the IES software libraries as follows:
- When you run the IES software independently from the
Quartus® Prime software, you should name your library work.
- When you run the IES software automatically from the
Quartus® Prime software, your library is automatically named gate_work under the current project directory,
and the work alias is mapped to the gate_work directory when performing gate level simulation.
- Specify your new work library name; for example, type
work
.
- Click OK.
- Repeat steps 7 and 8 for each functional simulation library; for example, for other
work library names, you could type
lpm
, altera_mf
,
altera
.
- In the Set Design
Directory dialog box, click OK.
- In the Library Browser, right-click the files you want to
compile, and then click NCVhdl on the pop-up menu.
- In the Compile VHDL
dialog box, you will see a list of all of the files you selected.
Apply any wanted options, and then click OK.
- Repeat steps 12 and 13 to compile the VHDL Output File for the
project and the appropriate library model
files.
- To simulate the design, click Simulator and type
<work
library>.<top-level entity
name>
in the Design Unit text box.
To direct the IES software to generate a Value Change Dump File that you can then
use to perform power analysis in the
Quartus® Prime
PowerPlay® Power Analyzer:
- In the file explorer pane, select the <testbench or design instance name>_dump_all_vcd_nodes.tcl
Tcl Script File (.tcl) generated by the
Quartus® Prime EDA Netlist Writer.
- On the File menu, click Source. The Tcl Script File directs the IES software to monitor
and write the output signals contained in the Tcl Script File to a Value Change Dump
File during
simulation.