Performing a Timing Simulation with the ModelSim-Intel FPGA Edition Software

You can perform a timing simulation of a Verilog HDL, SystemVerilog HDL, or VHDL design with the Mentor Graphics^® ModelSim-Intel FPGA Edition software from the ModelSim-Intel FPGA Edition interface or with command-line commands.

Important:Intel recommends that you set Time scale settings to picoseconds (ps) in the interface or with command-line commands when performing timing simulation.

Note: For more information about using EDA simulators, refer to Mentor Graphics^® ModelSim and QuestaSim Support in the Quartus^® Prime Handbook.

If you want to perform power analysis, proceed to perform power analysis with the PowerPlay^® Power Analyzer.