List of Messages |
CAUSE: You set the Power-Up Level option to High for output enable registers in the specified I/O cell. However, unused registers in I/O cells cannot be set to power up with a high logic level.
ACTION: No action is required. To avoid receiving this message in the future, Altera recommends that you turn on the Fast Output Enable Register option for the I/O cell, or turn off or set the Power-Up Level option to Low.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.