List of Messages |
CAUSE: This input pin has too many fanouts, which leads to a long compile time on the auto delay chain optimization. Thus, the optimization is disabled.
ACTION: Run TimeQuest Timing Analyzer to ensure that the design can close setup/hold time on this input pin. Consider manually setting the delay chain setting of this pin or turning on the AUTO_DELAY_CHAINS_FOR_HIGH_FANOUT_INPUT_PINS setting, which increases the compile time.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.