| List of Messages | |
CAUSE: You changed the target device family for a design, and compiled the design. The design contained the specified DQS_DELAY setting for the specified I/O pin, but the new target device family does not support the setting. To remap the setting from the old target device family to the new target device family, the Compiler created the specified CLK_DELAY_CTRL WYSIWYG primitive from the DQS_DELAY setting.
ACTION: No action is required.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.