List of Messages |
CAUSE: You turned on the Auto DSP Block Replacement logic option. As a result, Analysis & Synthesis inferred an altmult_add megafunction with the specified WIDTH_A, WIDTH_B, and NUMBER_OF_MULTIPLIERS parameter values from the specified logic in the current design. This message is a submessage of the message that precedes it in the Messages window and the Analysis & Synthesis Messages section of the Report window.
ACTION: If you want to prevent Analysis & Synthesis from converting logic into an altmult_add megafunction, turn off the Auto DSP Block Replacement logic option. Otherwise, no action is required.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.