List of Messages |
CAUSE: You attempted to optimize netlists by directing the Quartus Prime software to perform gate-level register retiming. However, the Quartus Prime software cannot move the specified number of registers.
ACTION: If you want to allow the Quartus Prime software to move these registers, set the Netlist Optimizations logic option to Always Allow. Otherwise, no action is required.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.