List of Messages
Parent topic: List of Messages

ID:12237 Can't elaborate the Quartus Prime Exported Partition File <name> because it contains a Post-Fit netlist created using device family <name> and is being used with the project's device family <name>

CAUSE: You used the specified Quartus Prime Exported Partition File (.qxp) as a design file in the current project. However, the Quartus Prime Exported Partition File contains a Post-Fit netlist created using the specified device family. Only the Quartus Prime Exported Partition File containing post-synthesis netlist created using the specified device family is supported with the specified project family.

ACTION: Re-export the specified Quartus Prime Exported Partition File containing a Post-Synthesis netlist.

Parent topic: List of Messages

Contact Altera | Legal Notice

Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.