List of Messages |
CAUSE: You tried to download a design in the SignalTap II Logic Analyzer. However, the SignalTap II Logic Analyzer cannot communicate with the JTAG chain. This message can occur because the board is not powered on, the programming hardware is not connected, there is a problem with the circuit board, or you did not download a design with the current SRAM Object File (.sof).
ACTION: Make sure the circuit board is powered on and programming hardware is connected properly, and download the current SOF.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.