List of Messages |
CAUSE: You directed the Compiler to select a target device for the current design, and specified the devices from which you want the Compiler to select the target device. However, input register(s) of the specified I/O primitive use a synchronous clear or synchronous set which are not supported for the device that the Compiler selected, or when using the DDIO_MODE parameter for the specified WYSIWYG I/O primitive.
ACTION: Select a specific target device, or avoid the use of synchronous clear or synchronous set on I/O primitive input registers in the design. For further assistance contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.