List of Messages |
CAUSE: The specified DSP block multiplier WYSIWYG primitive is in bypass-multiplier mode, but the specified source port is not connected to GND. When the DSP block multiplier WYSIWYG primitive is in bypass-multiplier mode, all source ports must be connected to GND.
ACTION: Connect the specified source signal of the specified DSP block multiplier WYSIWYG primitive to GND.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.