List of Messages |
CAUSE: The specified source port of the specified DSP block multiplier WYSIWYG primitive is connected to GND, but the corresponding specified scanin port is also connected. scanin ports can be connected only if the corresponding source port is not connected to GND. When the specified source port is not GND, the source port indicates that the corresponding scanin port is being used.
ACTION: Disconnect the specified scanin port, or disconnect the specified source port from GND.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.