List of Messages |
CAUSE: The specified DSP block output WYSIWYG primitive is using saturation because its saturate port is connected. However, the multiplier is not in accumulator or dynamic mode, which is required when using saturation.
ACTION: If you do not use saturation, ensure that the saturate port is not connected by defaulting it to GND.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.