List of Messages |
CAUSE: The specified port of the specified DSP block output WYSIWYG primitive is not connected to the specified port of the specified DSP block multiplier WYSIWYG primitive, but must be connected to a DSP block primitive WYSIWYG primitive when the OPERATION_MODE is set to the specified value.
ACTION: Connect the specified port of the specified WYSIWYG DSP block output primitive to the specified port of the specified WYSIWYG DSP block multiplier primitive.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.