List of Messages |
CAUSE: The specified port of the specified DSP block output WYSIWYG primitive is connected, but the OPERATION_MODE parameter is set to a value other than ACCUMULATOR_CHAIN_OUT or TWO_LEVEL_ADDER_CHAIN_OUT. The specified DSP block output WYSIWYG primitive must have the OPERATION_MODE parameter set to ACCUMULATOR_CHAIN_OUT or TWO_LEVEL_ADDER_CHAIN_OUT.
ACTION: Disconnect the specified port of the specified WYSIWYG DSP block output primitive, or check that OPERATION_MODE parameter of the specified WYSIWYG DSP block output primitive is set to TWO_LEVEL_ADDER_CHAIN_OUT or ACCUMULATOR_CHAIN_OUT.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.