List of Messages |
CAUSE: The specified DSP block multiplier WYSIWYG primitive uses the scanouta register, but the specified WYSIWYG DSP block multiplier is not connected via a dedicated scan chain.
ACTION: Connect the specified WYSIWYG DSP block multiplier primitive to another WYSIWYG DSP block multiplier primitive via a dedicated scan chain and make sure that the scan chain does not connect to a general routing, or disable the use of the scanouta register on the specified WYSIWYG DSP block multiplier.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.