List of Messages |
CAUSE: The specified DSP block multiplier WYSIWYG primitive forms a scan chain with the indicated multiplier WYSIWYG primitive and both use the SCANOUTA register. However, the multiplier WYSIWYG primitives cannot both use the SCANOUTA register in the specified OPERATION_MODE.
ACTION: Disconnect one of the specified WYSIWYG DSP block multiplier primitives from the scan chain, or set the CLOCK and CLEAR parameter of the specified register of one of the specified WYSIWYG DSP block multiplier primitives to NONE.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.