List of Messages |
CAUSE: The specified DSP block multiplier WYSIWYG primitive is using the scanouta register, but the scanouta register is not supported in the specified mode.
ACTION: Set the CLOCK and CLEAR parameter of the specified register of the specified WYSIWYG DSP block multiplier primitive to NONE.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.