List of Messages |
CAUSE: The specified DSP block output WYSIWYG primitive is using unsigned data in the specified mode, but the specified more requires signed data when the ACC_ADDER_OPERATION is set to the SUBTRACT value.
ACTION: Make sure the ACC_ADDER_OPERATION parameter is set to "ADD" for the specified WYSIWYG DSP block output, or make sure the specified WYSIWYG DSP block output is using signed data.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.