List of Messages |
CAUSE: The specified WYSIWYG flipflop primitive has both an aload port and a POWER_UP parameter value set to LOW. Either the aload port must be disconnected or the WYSIWYG flipflop primitive's POWER_UP parameter must be changed to HIGH.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.