List of Messages |
CAUSE: The specified WYSIWYG primitive has the RAM_BLOCK_TYPE parameter set to M512, but is in bidirectional dual-port mode (that is, it has the OPERATION_MODE parameter set to BIDIR_DUAL_PORT). M512 memory blocks do not support BIDIR_DUAL_PORT mode. Either the RAM_BLOCK_TYPE parameter must be set to M4K or MRAM, or the OPERATION_MODE parameter must be set to a value other than BIDIR_DUAL_PORT.
ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Altera Technical Support by creating a Service Request at www.altera.com/mysupport.
Copyright© 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS, STRATIX, and all other brands, unless noted otherwise, and/or trademarks of Altera Corporation in the U.S. and other countries.